TMM 80063-3 for Race Boats X2-SERIES PRO

x-series
  •  
  •  
  •  
  •  
TMM 80063-3 for Race Boats X2-SERIES PRO
1,888.90 USD from 1,739,- USD
Buy
Prices excl. VAT.

Price includes these selectable options

TMM 80063-3 for Race Boats X2-SERIES PRO1,739,- USD
ON/OFF switch 1.95 USD Yes
WP version (increased protection against water) 8.95 USD Yes
design with water-cooled heatsinks 139,- USD Yes
standard power conductors 2 × 10 mm2 with ring terminals 0,- USD Yes
Price total1,888.90 USD
x-series

Why should I buy this product?

  • 5 Years Warranty
  • Premium Customer Service Exclusive PRO
  • AwardWinning 32-BIT SYSTEM
  • Top Care and Engine Control
  • Unique System of Battery Care
  • Battery Long Life Mode
  • Precise Data Logging + Data Analysis
  • Real-time PC Monitoring
  • More Performance, Efficiency, Speed
  • Each Piece Tested - 100% Warranty
  • Unique Parameters and Options
  • Gold up to 8-Layer PCBs, 105um
  • MGM COMPRO Industrial Technology
  • Made Using Top Technologies

Product parametrs

Empty batt. behaviour - instant motor cut-off Yes
Setting of the range of neutral zone Yes
Possibility of switching reversible controller into "one-way" mode Yes
Reversible controller (both-way mode) Yes
Bidirectional "both-way" mode Yes
ACL - Automatic Current Limiting Yes
ACR - Automatic Current Reduce Yes
Temperature fuse of the controller Yes
Current fuse of the controller Yes
False-start protection Yes
Masking of interference Yes
Software reversal of rotation Yes
Empty batt. behaviour - motor power reduction Yes
Adjustable deceleration speed Yes
Adjustable acceleration speed Yes
External signalization of important states Yes
Possibility of connecting plane position lights and flashing lights Yes
Active free-wheeling circuit ON / OFF Yes
Possibility of automatic setting of throttle limits Yes
Possibility of manually set timing Yes
Automatically set timing Yes
Manually set type of cells Yes
Possibility of manually set number of cells Yes
Possibility of automatic setting of cut off voltage Yes
Possibility of setting switching off voltage Yes
Possibility of setting an amount of residual energy for BEC No
Possibility of setting the voltage of BEC No
Possibility of very powerful switching BECs No
Possibility of setting current limits Yes
Possibility of setting RPM limits Yes
Possibility of motor temperature measuring Yes
Possibility of cells temperature measuring Yes
Outstanding cells management Yes
Very high resistance against overloading Yes
Plug and Play (functional immediately without the need for additional programming) Yes
ICS-2 connector - super-fast PC connection link Yes
Programming using PC Yes
Reading-out of data from the controller using PC Yes
Software updates available through internet Yes
Telemetry (back data transfer) Yes
Real-time Monitoring (PC or other device) Yes
Internal Data Logger (data recorder) Yes
Possibility of design with ON/OFF switch (connected safely) Yes
Possibility of WR version (full protection against water) Yes
Possibility of WP version (increased protection against water) Yes
Possibility of design with external heatsinks + FAN Yes
Possibility of design with water-cooled heatsinks Yes
Possibility of design with external heatsinks Yes
Length of the servocable 190 [ mm ]
Servocable cross-section 0.25 [ mm2 ]
Length of the power conductors see guide [ mm ]
Power conductors cross-section to batt. / to mot. see guide [ mm2 ]
Weight incl. all conductors see guide [ gram ]
Weight without power conductors 1200 [ gram ]
Dimensions with external capacitor see guide [ mm ]
Dimensions see guide [ mm ]
Max RPMs 250.000
On-state switch (FETs) resistance at 25 °C 2 × 0.27 [ mW ]
Motor PWM frequency 8 - 32 [ kHz ]
Number of regulation steps 2048
BEC short circuit protection No
Max. BEC current at 25 °C No
Switching HV-BEC voltage No
Switching S-BEC voltage No
Available BEC / OPTO versions OPTO
Max. peak current (peak 5 sec.) 1000 [ A ]
Max. continuous current (for full throttle) 800 [ A ]
Operating voltage 12 - 63 [ V ]
Compatible with all types of feeding cells Yes
Number of A123 feeding cells 5 - 17
Number of NiCd, NiMh feeding cells 15 - 44
Number of Li-Pol, Li-Ion feeding cells 4 - 15
"One-way" mode Yes
Possibility of setting current limits Yes
Possibility of setting RPM limits (motor protection) Yes
Possibility of motor temperature measuring (motor protection) Yes
Possibility of cells temperature measuring (cells protection) Yes
4 Memory Banks Yes
32-BIT SYSTEM Yes
Automatic Sensor Setting Yes
Possibility of operation also with sensors motors Yes
Real-time Monitoring (PC or other device) Yes
Telemetry (real-time back data transfer) Yes
Internal Data Logger (data recorder) Yes