TMM 14063-3 for Airplanes X2-SERIES PRO

x-series
  •  
  •  
  •  
  •  
TMM 14063-3 for Airplanes X2-SERIES PRO
456.85 EUR from 429 EUR
Buy
Prices incl. 21% VAT.

Price includes these selectable options

TMM 14063-3 for Airplanes X2-SERIES PRO429 EUR
ON/OFF switch 2.95 EUR Yes
WP version (increased protection against water) 9.95 EUR Yes
design with external heatsinks 14.95 EUR Yes
standard power conductors 0 EUR Yes
Price total456.85 EUR
x-series

Why should I buy this product?

  • 5 Years Warranty
  • Premium Customer Service Exclusive PRO
  • AwardWinning 32-BIT SYSTEM
  • Top Care and Engine Control
  • Unique System of Battery Care
  • Battery Long Life Mode
  • Precise Data Logging + Data Analysis
  • Real-time PC Monitoring
  • More Performance, Efficiency, Speed
  • Each Piece Tested - 100% Warranty
  • Unique Parameters and Options
  • Gold up to 8-Layer PCBs, 105um
  • MGM COMPRO Industrial Technology
  • Made Using Top Technologies
YAK 54 - Jan Spatny YAK 54 - Jan Spatny

YAK 54 - Jan Spatny

Pilot: Jan Spatny, model type: YAK 54, motor: Gigatex Slim 3500W (sensored), speed controller (ESC): TMM 14063-3 X-SERIES (MGM COMPRO), batteries: 5000mAh 12S.

GBRJET Stinger V2 EDF GBRJET Stinger V2 EDF

GBRJET Stinger V2 EDF

JET that regularly achieves the speed over 170 mph! Setup: Schuebeler HST-51, 12S 5000mAh SLS Li-Pol and TMM 14063-3 X-SERIES speed controller. The pilot is Ali Machinchy, one of the world top RC pilots.

Product parametrs

Empty batt. behaviour - instant motor cut-off Yes
Setting of the range of neutral zone Yes
Possibility of automatic braking in neutral throttle position Yes
Possibility of setting neutral brake ramps Yes
Possibility of setting brake ramps Yes
Possibility of setting brake intensity Yes
Proportional brake Yes
Brake ON / OFF Yes
Possibility of switching reversible controller into "one-way" mode Yes
Reversible controller (both-way mode) Yes
Bidirectional "both-way" mode Yes
ACL - Automatic Current Limiting Yes
ACR - Automatic Current Reduce Yes
Temperature fuse of the controller Yes
Current fuse of the controller Yes
False-start protection Yes
Masking of interference Yes
Software reversal of rotation Yes
Empty batt. behaviour - motor power reduction Yes
Adjustable acceleration speed Yes
External signalization of important states Yes
Possibility of connecting plane position lights and flashing lights Yes
Active free-wheeling circuit ON / OFF Yes
Possibility of automatic setting of throttle limits Yes
Possibility of manually set timing Yes
Automatically set timing Yes
Manually set type of cells Yes
Possibility of manually set number of cells Yes
Possibility of automatic setting of cut off voltage Yes
Possibility of setting switching off voltage Yes
Possibility of setting an amount of residual energy for BEC No
Possibility of setting the voltage of BEC No
Possibility of very powerful switching BECs No
Possibility of setting current limits Yes
Possibility of setting RPM limits Yes
Possibility of motor temperature measuring Yes
Possibility of cells temperature measuring Yes
Outstanding cells management Yes
Very high resistance against overloading Yes
Plug and Play (functional immediately without the need for additional programming) Yes
ICS-2 connector - super-fast PC connection link Yes
Programming using PC Yes
Reading-out of data from the controller using PC Yes
Software updates available through internet Yes
Telemetry (back data transfer) Yes
Real-time Monitoring (PC or other device) Yes
Internal Data Logger (data recorder) Yes
Possibility of design with ON/OFF switch (connected safely) Yes
Possibility of WR version (full protection against water) Yes
Possibility of WP version (increased protection against water) Yes
Possibility of design with external heatsinks + FAN Yes
Possibility of design with water-cooled heatsinks Yes
Possibility of design with external heatsinks Yes
Length of the servocable 190 [ mm ]
Servocable cross-section 0.25 [ mm2 ]
Length of the power conductors 120 [ mm ]
Power conductors cross-section to batt. / to mot. 6/4 [ mm2 ]
Weight incl. all conductors 90 [ gram ]
Weight without power conductors 50 [ gram ]
Dimensions with external capacitor 80×31×17 [ mm ]
Dimensions 50×31×17 [ mm ]
Max RPMs 250.000
On-state switch (FETs) resistance at 25 °C 2 × 0.33 [ mW ]
Motor PWM frequency 8 - 32 [ kHz ]
Number of regulation steps 2048
BEC short circuit protection No
Max. BEC current at 25 °C No
Switching HV-BEC voltage No
Switching S-BEC voltage No
Available BEC / OPTO versions OPTO
Max. peak current (peak 5 sec.) 180 [ A ]
Max. continuous current (for full throttle) 140 [ A ]
Operating voltage 9 - 63 [ V ]
Compatible with all types of feeding cells Yes
Number of A123 feeding cells 4 - 17
Number of NiCd, NiMh feeding cells 9 - 44
Number of Li-Pol, Li-Ion feeding cells 3 - 15
"One-way" mode Yes
Possibility of setting current limits Yes
Possibility of setting RPM limits (motor protection) Yes
Possibility of motor temperature measuring (motor protection) Yes
Possibility of cells temperature measuring (cells protection) Yes
4 Memory Banks Yes
32-BIT SYSTEM Yes
Automatic Sensor Setting Yes
Possibility of operation also with sensors motors Yes
Real-time Monitoring (PC or other device) Yes
Telemetry (real-time back data transfer) Yes
Internal Data Logger (data recorder) Yes