TMM 14035-3 for Cars X2-SERIES LITE

x-series
  •  
  •  
TMM 14035-3 for Cars X2-SERIES LITE
261.85 EUR from 219 EUR
Buy
Prices incl. 21% VAT.

Price includes these selectable options

TMM 14035-3 for Cars X2-SERIES LITE219 EUR
ON/OFF switch 2.95 EUR Yes
WP version (increased protection against water) 9.95 EUR Yes
design with active FAN cooling (2 × heatsink + 2 × FAN) 29.95 EUR Yes
standard power conductors 0 EUR Yes
Price total261.85 EUR
x-series

Why should I buy this product?

  • 2 Years Warranty
  • 32-BIT SYSTEM
  • Top Care and Engine Control
  • Unique System of Battery Care
  • Precise Data Logging + Data Analysis
  • Each Piece Tested - 100% Warranty
  • Gold up to 8-Layer PCBs, 105um
  • Made Using Top Technologies

Product parametrs

Empty batt. behaviour - instant motor cut-off Yes
Possibility of connecting braking lights Yes
Setting of the range of neutral zone No
Possibility of automatic braking in neutral throttle position Yes
Possibility of setting neutral brake ramps No
Possibility of setting brake ramps No
Possibility of setting brake intensity Yes
ABS simulation Yes
Proportional brake Yes
Brake ON / OFF Yes
Possibility of switching reversible controller into "one-way" mode Yes
Reversible controller (both-way mode) Yes
Bidirectional "both-way" mode Yes
ACL - Automatic Current Limiting Yes
ACR - Automatic Current Reduce Yes
Temperature fuse of the controller Yes
Current fuse of the controller Yes
False-start protection Yes
Masking of interference Yes
Software reversal of rotation Yes
Empty batt. behaviour - motor power reduction Yes
Adjustable acceleration speed Yes
External signalization of important states No
Active free-wheeling circuit ON / OFF Yes
Possibility of automatic setting of throttle limits Yes
Possibility of manually set timing Yes
Automatically set timing Yes
Manually set type of cells Yes
Possibility of manually set number of cells Yes
Possibility of automatic setting of cut off voltage Yes
Possibility of setting switching off voltage Yes
Possibility of setting an amount of residual energy for BEC Yes
Possibility of setting the voltage of BEC No
Possibility of very powerful switching BECs Yes
Possibility of setting current limits No
Possibility of setting RPM limits No
Possibility of motor temperature measuring No
Possibility of cells temperature measuring No
Outstanding cells management Yes
Very high resistance against overloading Yes
Plug and Play (functional immediately without the need for additional programming) Yes
ICS-2 connector - super-fast PC connection link Yes
Programming using PC Yes
Reading-out of data from the controller using PC Yes
Software updates available through internet Yes
Telemetry (back data transfer) No
Real-time Monitoring (PC or other device) No
Internal Data Logger (data recorder) Yes
Possibility of design with ON/OFF switch (connected safely) Yes
Possibility of WR version (full protection against water) Yes
Possibility of WP version (increased protection against water) Yes
Possibility of design with external heatsinks + FAN Yes
Possibility of design with water-cooled heatsinks Yes
Possibility of design with external heatsinks Yes
Length of the servocable 190 [ mm ]
Servocable cross-section 0.25 [ mm2 ]
Length of the power conductors 120 [ mm ]
Power conductors cross-section to batt. / to mot. 6/4 [ mm2 ]
Weight incl. all conductors 65 [ gram ]
Weight without power conductors 40 [ gram ]
Dimensions with external capacitor 70×31×17 [ mm ]
Dimensions 50×31×17 [ mm ]
Max RPMs 250.000
On-state switch (FETs) resistance at 25 °C 2 × 0.55 [ mW ]
Motor PWM frequency 8 - 32 [ kHz ]
Number of regulation steps 2048
BEC short circuit protection Yes
Max. BEC current at 25 °C 6 [ A ]
Switching HV-BEC voltage No
Switching S-BEC voltage 5 [ V ]
Available BEC / OPTO versions S-BEC
Max. peak current (peak 5 sec.) 180 [ A ]
Max. continuous current (for full throttle) 140 [ A ]
Operating voltage 6 - 35 [ V ]
Compatible with all types of feeding cells Yes
Number of A123 feeding cells 3 - 9
Number of NiCd, NiMh feeding cells 6 - 24
Number of Li-Pol, Li-Ion feeding cells 2 - 8
"One-way" mode Yes
Possibility of setting current limits No
Possibility of setting RPM limits (motor protection) No
Possibility of motor temperature measuring (motor protection) No
Possibility of cells temperature measuring (cells protection) No
4 Memory Banks No
32-BIT SYSTEM Yes
Automatic Sensor Setting No
Possibility of operation also with sensors motors No
Real-time Monitoring (PC or other device) No
Telemetry (real-time back data transfer) No
Internal Data Logger (data recorder) Yes