TMM 12026-3 for Race Boats X2-SERIES PRO ▪️ MGM CONTROLLERS
Share this on
  • facebook
  • twitter

TMM 12026-3 for Race Boats X2-SERIES PRO

Price includes following configuration
TMM 12026-3 for Race Boats X2-SERIES PRO 182,85 €
design with active FAN cooling (2 × heatsink + 2 × FAN) 24,95 €
Standard power cables 0,00 €
Increased humidity protection 8,95 €
ON/OFF switch 1,95 €
Price total excl. VAT 218,70 €
nazev produktu
Need a different configuration?

Make your own custom configuration that fits your model. Choose from multiple add-ons and stand out from the crowd.

Max. continuous current
Max. continuous current
Operating voltage
Operating voltage
6 - 26 V
Max. peak current
Max. peak current
50 mm

Pushing the limits!

MGM speed controllers were designed to help you to push the limits of your model while staying on the safe side. Sophisticated data-logging and system of fuses enables you to get to the next level without risking your precious model.

Our technology was quickly adopted not just by RC modellers but various battlebots, solar boat or Space X Hyperloop teams and industrial projects.

Compatible with any motor

Whether you run inrunner, outrunner, sensored or sensorless motor. You can adjust settings of your ESC to work flawlessly with every motor on the market. We personally pair our ESCs with LMT motors made with German precision. You can choose from numerous types of motors and infinite variants of Kv. 

Advanced Programming

Thanks to our free PC application CONTROLLERS 2 you are able to discover the new possibilities of your model. Finding the best settings for your RC model has never been so exciting! Change over 50 parameters, upgrade firmware or check relevant data from the run.


To connect ESC with PC you need USBCOM5 and CC_11 cable.

Temperature fuse of the controller
Bidirectional "both-way" mode
Number of cells 2 - 6
Possibility of switching reversible controller into "one-way" mode
Internal Data Logger (data recorder)
Real-time Monitoring (PC or other device)
Automatic Sensor Setting
4 Memory Banks
Number of A123 feeding cells 3
Max. continuous current 120A
Available BEC / OPTO versions 0
Operating voltage 6 - 26 V
Switching HV-BEC voltage 5 V
Very high resistance against overloading
BEC short circuit protection
Possibility of cells temperature measuring (cells protection)
Motor PWM frequency 8 kHz
Possibility of setting RPM limits (motor protection)
Max. RPM 200000
Possibility of very powerful switching BECs
Dimensions with external capacitor 65 mm
Possibility of setting an amount of residual energy for BEC
Weight incl. all conductors 61 gram
Possibility of automatic setting of cut off voltage
Length of the power conductors 120 mm
Manually set type of cells
Length of the servocable 190 mm
Possibility of manually set timing
Possibility of design with water-cooled heatsinks
Active free-wheeling circuit ON / OFF
Possibility of WP version (increased protection against water)
External signalization of important states
Possibility of design with ON/OFF switch (connected safely)
Adjustable deceleration speed
Reading-out of data from the controller using PC
Software reversal of rotation
ICS-2 connector - super-fast PC connection link
False-start protection
ACR - Automatic Current Reduce
Reversible controller (both-way mode)
Setting of the range of neutral zone
Telemetry (real-time back data transfer)
Possibility of operation also with sensors motors
"One-way" mode
Compatible with all types of feeding cells
Max. peak current 150A
Number of NiCd, NiMh feeding cells 6
Switching S-BEC voltage 5 V
Plug and Play (functional immediately without the need for additional programming)
Max. BEC current at 25 °C 6A
Outstanding cells management
Number of regulation steps 2048
Possibility of motor temperature measuring (motor protection)
On-state switch (FETs) resistance at 25 °C 2 mW
Possibility of setting current limits
Dimensions 50 mm
Possibility of setting the voltage of BEC
Weight without power conductors 36 gram
Possibility of setting switching off voltage
Power conductors cross-section to batt. / to mot. 4 mm2
Possibility of manually set number of cells
Servocable cross-section 0.25 mm2
Automatically set timing
Possibility of design with external heatsinks
Possibility of automatic setting of throttle limits
Possibility of design with external heatsinks + FAN
Possibility of connecting plane position lights and flashing lights
Possibility of WR version (full protection against water)
Adjustable acceleration speed
Software updates available through internet
Empty batt. behaviour - motor power reduction
Programming using PC
Masking of interference
Model Type For boats
Current fuse of the controller

Get the full advantage of our 30 years of experience with producing ESCs for both, industrial and modellers customers. X2-SERIES controllers are fully programmable and adjustable for any RC model. You can use our own PC software to adjust the parameters and reading out the history logs of your runs as well. With X2-SERIES controllers you will be able to find the most efficient setup. Developed with RC modellers in mind, we used our experience from various industrial projects to create reliable ESCs with sophisticated system of fuses for the safety of your model. This comes backed by 3 years warranty.

More info
Premium customer service
High controller efficiency
Precise data logging + data analysis
Unique systemof battery care
32 bit system
Unique parameters and options
Each piece tested
Real-time monitoring
Golden multilayerPCB - 105µ

Product categories: