TMM 25063-3 for Cars X2-SERIES
| TMM 25063-3 for Cars X2-SERIES | 550,85 € |
| Design with active FAN cooling (1 × FAN) | 19,95 € |
| power cables 10.0 mm2 (8 AWG) | 14,95 € |
| Increased humidity protection | 8,95 € |
| ON/OFF switch | 1,95 € |
| 596,65 € |
Make your own custom configuration that fits your model. Choose from multiple add-ons and stand out from the crowd.
CONFIGURE YOUR OWN
Small Size, Big Power.
Meet TMM 25063-3 - powerful ESC for all types of RC model. This speed controller excels in its size and functions like internal data logging, real-time monitoring or telemetry.
Break the Records
With the greatest power in such a small size it is a speed controller created to let a wide range of RC models push the limits of what is possible. With 25kW in 360 [A] of peak currents, 250 [A] continuous and possibility of running up to 15S we made sure you will never be behind.
Advanced Programming
Thanks to our free PC application CONTROLLERS 2 you are able to discover the new possibilities of your model. Finding the best settings for your RC model has never been so exciting! Change over 50 parameters, upgrade firmware or check relevant data from the run.
To connect ESC with PC you need USBCOM5 and CC_11 cable.
Not sure if this ESC is right for you? Take a look at all our speed controllers, read frequently asked questions, or leave us a message and our support team will take care of you!
| Max. peak current | 360A |
| Number of cells | 4 - 15 |
| Max. continuous current | 250A |
| Dimensions | see guide |
| Operating voltage | 12 - 63 V |
| Very high resistance against overloading | |
| 4 Memory Banks | |
| Possibility of cells temperature measuring (cells protection) |
| Available BEC / OPTO versions | |
| Possibility of setting RPM limits (motor protection) | |
| Switching HV-BEC voltage | V |
| Possibility of very powerful switching BECs | |
| BEC short circuit protection | |
| Possibility of setting an amount of residual energy for BEC | |
| Motor PWM frequency | 8 kHz |
| Possibility of automatic setting of cut off voltage | |
| Max. RPM | 200000 |
| Dimensions with external capacitor | see guide |
| Manually set type of cells | |
| Weight incl. all conductors | see guide |
| Possibility of manually set timing | |
| Length of the power conductors | see guide |
| Active free-wheeling circuit ON / OFF | |
| Adjustable acceleration speed | |
| Length of the servocable | 190 mm |
| Software reversal of rotation | |
| Possibility of design with water-cooled heatsinks | |
| False-start protection | |
| Possibility of WP version (increased protection against water) | |
| Temperature fuse of the controller | |
| Possibility of design with ON/OFF switch (connected safely) | |
| Bidirectional "both-way" mode | |
| Reading-out of data from the controller using PC | |
| Possibility of switching reversible controller into "one-way" mode | |
| ICS-2 connector - super-fast PC connection link | |
| Proportional brake | |
| Possibility of setting brake intensity | |
| Possibility of setting neutral brake ramps | |
| Setting of the range of neutral zone | |
| Internal Data Logger (data recorder) | |
| Real-time Monitoring (PC or other device) | |
| Automatic Sensor Setting | |
| 32-BIT SYSTEM | |
| Number of NiCd, NiMh feeding cells | 15 |
| "One-way" mode | |
| Plug and Play (functional immediately without the need for additional programming) | |
| Compatible with all types of feeding cells | |
| Outstanding cells management | |
| Possibility of motor temperature measuring (motor protection) | |
| Switching S-BEC voltage | V |
| Possibility of setting current limits | |
| Max. BEC current at 25 °C | A |
| Possibility of setting the voltage of BEC | |
| Number of regulation steps | 2048 |
| Possibility of setting switching off voltage | |
| On-state switch (FETs) resistance at 25 °C | 2 mW |
| Possibility of manually set number of cells | |
| Number of A123 feeding cells | 5 |
| Automatically set timing | |
| Weight without power conductors | 300 gram |
| Possibility of automatic setting of throttle limits | |
| Power conductors cross-section to batt. / to mot. | see guide |
| External signalization of important states | |
| Servocable cross-section | 0.25 mm2 |
| Empty batt. behaviour - motor power reduction | |
| Possibility of design with external heatsinks | |
| Masking of interference | |
| Possibility of design with external heatsinks + FAN | |
| Current fuse of the controller | |
| Possibility of WR version (full protection against water) | |
| ACR - Automatic Current Reduce | |
| Software updates available through internet | |
| Reversible controller (both-way mode) | |
| Programming using PC | |
| Brake ON / OFF | |
| Model Type | For cars |
| ABS simulation | |
| Possibility of setting brake ramps | |
| Possibility of automatic braking in neutral throttle position | |
| Possibility of connecting braking lights | |
| Telemetry (real-time back data transfer) | |
| Possibility of operation also with sensors motors |
Get the full advantage of our 30 years of experience with producing ESCs for both, industrial and modellers customers. X2-SERIES controllers are fully programmable and adjustable for any RC model. You can use our own PC software to adjust the parameters and reading out the history logs of your runs as well. With X2-SERIES controllers you will be able to find the most efficient setup. Developed with RC modellers in mind, we used our experience from various industrial projects to create reliable ESCs with sophisticated system of fuses for the safety of your model. This comes backed by 3 years warranty.
More info
Product categories:
Other products
TMM 40063-3 for Cars X2-SERIES PRO
| Number of cells | 4 - 15 |
| Max. continuous current | 400A |
| Max. peak current | 500A |
| Max. RPM | 200000 |
ESC + Motor combo for 1/5 scale cars
| Number of cells | 4 - 15 |
| Max. peak current | 360A |
| Max. RPM | 50000 |
| Max. power | 30kW |
