TMM 25063-3 for Drones X2-SERIES PRO
| TMM 25063-3 for Drones X2-SERIES PRO | 631,35 € |
| Design with active FAN cooling (1 × FAN) | 19,95 € |
| power cables 10.0 mm2 (8 AWG) | 14,95 € |
| Increased humidity protection | 8,95 € |
| ON/OFF switch | 1,95 € |
| 677,15 € |
Make your own custom configuration that fits your model. Choose from multiple add-ons and stand out from the crowd.
CONFIGURE YOUR OWN
Small Size, Big Power.
Meet TMM 25063-3 - powerful ESC for all types of RC model. This speed controller excels in its size and functions like internal data logging, real-time monitoring or telemetry.
Break the Records
With the greatest power in such a small size it is a speed controller created to let a wide range of RC models push the limits of what is possible. With 25kW in 360 [A] of peak currents, 250 [A] continuous and possibility of running up to 15S we made sure you will never be behind.
Advanced Programming
Thanks to our free PC application CONTROLLERS 2 you are able to discover the new possibilities of your model. Finding the best settings for your RC model has never been so exciting! Change over 50 parameters, upgrade firmware or check relevant data from the run.
To connect ESC with PC you need USBCOM5 and CC_11 cable.
Not sure if this ESC is right for you? Take a look at all our speed controllers, read frequently asked questions, or leave us a message and our support team will take care of you!
| Max. peak current | 360A |
| Number of cells | 4 - 15 |
| Max. continuous current | 250A |
| Operating voltage | 12 - 63 V |
| Dimensions | see guide |
| 32-BIT SYSTEM | |
| Switching S-BEC voltage | V |
| Max. BEC current at 25 °C | A |
| "One-way" mode | |
| Number of regulation steps | 2048 |
| Very high resistance against overloading | |
| Motor PWM frequency | 8 kHz |
| Possibility of cells temperature measuring (cells protection) | |
| Max. RPM | 200000 |
| Dimensions with external capacitor | see guide |
| Possibility of setting RPM limits (motor protection) | |
| Weight incl. all conductors | see guide |
| Possibility of very powerful switching BECs | |
| Length of the power conductors | see guide |
| Possibility of setting an amount of residual energy for BEC | |
| Possibility of automatic setting of cut off voltage | |
| Length of the servocable | 190 mm |
| Manually set type of cells | |
| Possibility of design with water-cooled heatsinks | |
| Possibility of manually set timing | |
| Possibility of WP version (increased protection against water) | |
| Active free-wheeling circuit ON / OFF | |
| Possibility of design with ON/OFF switch (connected safely) | |
| Constant speed (Governor mode) | |
| Reading-out of data from the controller using PC | |
| Adjustable acceleration speed | |
| ICS-2 connector - super-fast PC connection link | |
| Empty batt. behaviour - motor power reduction | |
| Masking of interference | |
| Current fuse of the controller | |
| ACR - Automatic Current Reduce | |
| Telemetry (real-time back data transfer) | |
| Possibility of operation also with sensors motors | |
| 4 Memory Banks | |
| Number of A123 feeding cells | 5 |
| Available BEC / OPTO versions | |
| Switching HV-BEC voltage | V |
| Number of NiCd, NiMh feeding cells | 15 |
| BEC short circuit protection | |
| Plug and Play (functional immediately without the need for additional programming) | |
| Input control signal | 400 |
| Outstanding cells management | |
| On-state switch (FETs) resistance at 25 °C | 2 mW |
| Possibility of motor temperature measuring (motor protection) | |
| Compatible with all types of feeding cells | |
| Possibility of setting current limits | |
| Weight without power conductors | 300 gram |
| Possibility of setting the voltage of BEC | |
| Power conductors cross-section to batt. / to mot. | see guide |
| Possibility of setting switching off voltage | |
| Servocable cross-section | 0.25 mm2 |
| Possibility of manually set number of cells | |
| Possibility of design with external heatsinks | |
| Automatically set timing | |
| Possibility of design with external heatsinks + FAN | |
| Possibility of automatic setting of throttle limits | |
| Possibility of WR version (full protection against water) | |
| Possibility of connecting plane position lights and flashing lights | |
| Software updates available through internet | |
| External signalization of important states | |
| Programming using PC | |
| Adjustable deceleration speed | |
| Model Type | For drones |
| Software reversal of rotation | |
| False-start protection | |
| Temperature fuse of the controller | |
| Internal Data Logger (data recorder) | |
| Real-time Monitoring (PC or other device) | |
| Automatic Sensor Setting |
Get the full advantage of our 30 years of experience with producing ESCs for both, industrial and modellers customers. X2-SERIES controllers are fully programmable and adjustable for any RC model. You can use our own PC software to adjust the parameters and reading out the history logs of your runs as well. With X2-SERIES controllers you will be able to find the most efficient setup. Developed with RC modellers in mind, we used our experience from various industrial projects to create reliable ESCs with sophisticated system of fuses for the safety of your model. This comes backed by 3 years warranty.
More info
Product categories:
Other products
TMM 40063-3 for Drones X2-SERIES PRO
| Number of cells | 4 - 15 |
| Max. continuous current | 400A |
| Max. peak current | 500A |
| Max. RPM | 200000 |
ESC + Motor combo for 1/5 scale cars
| Number of cells | 4 - 15 |
| Max. peak current | 360A |
| Max. RPM | 50000 |
| Max. power | 30kW |
