TMM 28026-3 for Race Boats X2-SERIES PRO
TMM 28026-3 for Race Boats X2-SERIES PRO | 320,85 € |
design with active FAN cooling (2 × heatsink + 2 × FAN) | 24,95 € |
Standard power cables | 0,00 € |
switching high voltage HV-BEC (5V / 6V / 7V / 8V) | 19,95 € |
Increased humidity protection | 8,95 € |
ON/OFF switch | 1,95 € |
Price total excl. VAT | 376,65 € |
Make your own custom configuration that fits your model. Choose from multiple add-ons and stand out from the crowd.
CONFIGURE YOUR OWNPushing the limits!
MGM speed controllers were designed to help you to push the limits of your model while staying on the safe side. Sophisticated data-logging and system of fuses enables you to get to the next level without risking your precious model.Our technology was quickly adopted not just by RC modellers but various battlebots, solar boat or Space X Hyperloop teams and industrial projects.
Compatible with any motor
Whether you run inrunner, outrunner, sensored or sensorless motor. You can adjust settings of your ESC to work flawlessly with every motor on the market. We personally pair our ESCs with LMT motors made with German precision. You can choose from numerous types of motors and infinite variants of Kv.
Advanced Programming
Thanks to our free PC application CONTROLLERS 2 you are able to discover the new possibilities of your model. Finding the best settings for your RC model has never been so exciting! Change over 50 parameters, upgrade firmware or check relevant data from the run.
To connect ESC with PC you need USBCOM5 and CC_11 cable.
Not sure if this ESC is right for you? Take a look at all our speed controllers, read frequently asked questions, or leave us a message and our support team will take care of you!
Bidirectional "both-way" mode | |
Number of cells | 2 - 6 |
Possibility of switching reversible controller into "one-way" mode | |
Internal Data Logger (data recorder) | |
Real-time Monitoring (PC or other device) | |
Automatic Sensor Setting | |
4 Memory Banks | |
Number of A123 feeding cells | 3 |
Max. continuous current | 280A |
Available BEC / OPTO versions | |
Operating voltage | 6 - 26 V |
Switching HV-BEC voltage | 5 V |
Very high resistance against overloading | |
BEC short circuit protection | |
Possibility of cells temperature measuring (cells protection) | |
Motor PWM frequency | 8 kHz |
Possibility of setting RPM limits (motor protection) | |
Max. RPM | 200000 |
Possibility of very powerful switching BECs | |
Dimensions with external capacitor | 65 mm |
Possibility of setting an amount of residual energy for BEC | |
Weight incl. all conductors | 105 gram |
Possibility of automatic setting of cut off voltage | |
Length of the power conductors | 120 mm |
Manually set type of cells | |
Length of the servocable | 190 mm |
Possibility of manually set timing | |
Possibility of design with water-cooled heatsinks | |
Active free-wheeling circuit ON / OFF | |
Possibility of WP version (increased protection against water) | |
External signalization of important states | |
Possibility of design with ON/OFF switch (connected safely) | |
Adjustable deceleration speed | |
Reading-out of data from the controller using PC | |
Software reversal of rotation | |
ICS-2 connector - super-fast PC connection link | |
False-start protection | |
Temperature fuse of the controller | |
Reversible controller (both-way mode) | |
Setting of the range of neutral zone | |
Telemetry (real-time back data transfer) | |
Possibility of operation also with sensors motors | |
32-BIT SYSTEM | |
"One-way" mode | |
Compatible with all types of feeding cells | |
Max. peak current | 340A |
Number of NiCd, NiMh feeding cells | 6 |
Switching S-BEC voltage | 5 V |
Plug and Play (functional immediately without the need for additional programming) | |
Max. BEC current at 25 °C | 6A |
Outstanding cells management | |
Number of regulation steps | 2048 |
Possibility of motor temperature measuring (motor protection) | |
On-state switch (FETs) resistance at 25 °C | 2 mW |
Possibility of setting current limits | |
Dimensions | 50 mm |
Possibility of setting the voltage of BEC | |
Weight without power conductors | 65 gram |
Possibility of setting switching off voltage | |
Power conductors cross-section to batt. / to mot. | 6 mm2 |
Possibility of manually set number of cells | |
Servocable cross-section | 0.25 mm2 |
Automatically set timing | |
Possibility of design with external heatsinks | |
Possibility of automatic setting of throttle limits | |
Possibility of design with external heatsinks + FAN | |
Possibility of connecting plane position lights and flashing lights | |
Possibility of WR version (full protection against water) | |
Adjustable acceleration speed | |
Software updates available through internet | |
Empty batt. behaviour - motor power reduction | |
Programming using PC | |
Masking of interference | |
Model Type | For boats |
Current fuse of the controller | |
ACR - Automatic Current Reduce |
Get the full advantage of our 30 years of experience with producing ESCs for both, industrial and modellers customers. X2-SERIES controllers are fully programmable and adjustable for any RC model. You can use our own PC software to adjust the parameters and reading out the history logs of your runs as well. With X2-SERIES controllers you will be able to find the most efficient setup. Developed with RC modellers in mind, we used our experience from various industrial projects to create reliable ESCs with sophisticated system of fuses for the safety of your model. This comes backed by 3 years warranty.
More infoProduct categories:
Other products
TMM 16026-3 for Race Boats X2-SERIES PRO
Number of cells | 2 - 6 |
Max. continuous current | 160A |
Max. peak current | 200A |
Max. RPM | 200000 |
TMM 25035-3 for Race Boats X2-SERIES PRO
Number of cells | 2 - 8 |
Max. continuous current | 250A |
Max. peak current | 300A |
Max. RPM | 200000 |