TMM 40063-3 for Airplanes X2-SERIES

Price includes following configuration

TMM 40063-3 for Airplanes X2-SERIES	723,35 €
	723,35 €

Need a different configuration?

Make your own custom configuration that fits your model. Choose from multiple add-ons and stand out from the crowd.

CONFIGURE YOUR OWN

Max. peak current

500A

Max. continuous current

400A

Dimensions

see guide

Operating voltage

12 - 63 V

If you can dream it, you can do it. TMM 40063-3 has everything. Seriously, everything! From internal data logging, and real-time monitoring to telemetry and a special MGM software for programming – your friends will envy you. With the greatest power and configurability yet, it is a speed controller created to let a wide range of RC models push the limits of what is possible. With 25kW in 500 [A] of peak currents, 400 [A] continuous and possibility of running up to 15S we made sure you will never be behind

Big just enough.

No wonder this ESC is the most popular option. Not just for the 5th scale but for every RC guy who needs extreme power. No one will stop you from putting it into anything – on the contrary, we will be happy to help you with that. Total dimensions depend on the configuration.

Advanced Programming

Thanks to our free PC application CONTROLLERS 2 you are able to discover the new possibilities of your model. Finding the best settings for your RC model has never been so exciting! Change over 50 parameters, upgrade firmware or check relevant data from the run.

CONTROLLER2

To connect ESC with PC you need USBCOM5 and CC_11 cable.

Not sure if this ESC is right for you? Take a look at all our speed controllers, read frequently asked questions, or leave us a message and our support team will take care of you!

Max. peak current	500A
Number of cells	4 - 15
Max. continuous current	400A
Dimensions	see guide
Operating voltage	12 - 63 V
On-state switch (FETs) resistance at 25 °C	2 mW
Possibility of automatic setting of cut off voltage
Possibility of setting an amount of residual energy for BEC

Manually set type of cells
Weight without power conductors	460 gram
Power conductors cross-section to batt. / to mot.	see guide
Possibility of manually set timing
Active free-wheeling circuit ON / OFF
Servocable cross-section	0.25 mm²
External signalization of important states
Possibility of design with external heatsinks
Empty batt. behaviour - motor power reduction
Possibility of design with external heatsinks + FAN
Masking of interference
Possibility of WR version (full protection against water)
Current fuse of the controller
Software updates available through internet
ACR - Automatic Current Reduce
Programming using PC
Reversible controller (both-way mode)
Model Type	For airplanes
Brake ON / OFF
Possibility of setting brake intensity
Possibility of setting neutral brake ramps
Setting of the range of neutral zone
Telemetry (real-time back data transfer)
Possibility of operation also with sensors motors
32-BIT SYSTEM
"One-way" mode
Compatible with all types of feeding cells
Very high resistance against overloading
Possibility of cells temperature measuring (cells protection)
Switching S-BEC voltage	V
Possibility of setting RPM limits (motor protection)
Max. BEC current at 25 °C	A
Possibility of very powerful switching BECs
Number of regulation steps	2048
Motor PWM frequency	8 kHz
Possibility of setting switching off voltage
Max. RPM	200000
Possibility of manually set number of cells
Dimensions with external capacitor	see guide
Automatically set timing
Weight incl. all conductors	see guide
Possibility of automatic setting of throttle limits
Length of the power conductors	see guide
Possibility of connecting plane position lights and flashing lights
Length of the servocable	190 mm
Adjustable acceleration speed
Possibility of design with water-cooled heatsinks
Software reversal of rotation
Possibility of WP version (increased protection against water)
False-start protection
Possibility of design with ON/OFF switch (connected safely)
Temperature fuse of the controller
Reading-out of data from the controller using PC
Bidirectional "both-way" mode
ICS-2 connector - super-fast PC connection link
Possibility of switching reversible controller into "one-way" mode
Proportional brake
Possibility of setting brake ramps
Possibility of automatic braking in neutral throttle position
Internal Data Logger (data recorder)
Real-time Monitoring (PC or other device)
Automatic Sensor Setting
4 Memory Banks
Number of NiCd, NiMh feeding cells	15
Number of A123 feeding cells	5
Plug and Play (functional immediately without the need for additional programming)
Outstanding cells management
Available BEC / OPTO versions
Possibility of motor temperature measuring (motor protection)
Switching HV-BEC voltage	V
Possibility of setting current limits
BEC short circuit protection
Possibility of setting the voltage of BEC

Get the full advantage of our 30 years of experience with producing ESCs for both, industrial and modellers customers. X2-SERIES controllers are fully programmable and adjustable for any RC model. You can use our own PC software to adjust the parameters and reading out the history logs of your runs as well. With X2-SERIES controllers you will be able to find the most efficient setup. Developed with RC modellers in mind, we used our experience from various industrial projects to create reliable ESCs with sophisticated system of fuses for the safety of your model. This comes backed by 3 years warranty.

More info