Share this on

TMM 40063-3 for Cars X2-SERIES

Price includes following configuration

TMM 40063-3 for Cars X2-SERIES	723,35 €
	723,35 €

Need a different configuration?

Make your own custom configuration that fits your model. Choose from multiple add-ons and stand out from the crowd.

CONFIGURE YOUR OWN

Max. peak current

500A

Max. continuous current

400A

Dimensions

see guide

Operating voltage

12 - 63 V

If you can dream it, you can do it. TMM 40063-3 has everything. Seriously, everything! From internal data logging, and real-time monitoring to telemetry and a special MGM software for programming – your friends will envy you. With the greatest power and configurability yet, it is a speed controller created to let a wide range of RC models push the limits of what is possible. With 25kW in 500 [A] of peak currents, 400 [A] continuous and possibility of running up to 15S we made sure you will never be behind

Big just enough.

No wonder this ESC is the most popular option. Not just for the 5th scale but for every RC guy who needs extreme power. No one will stop you from putting it into anything – on the contrary, we will be happy to help you with that. Total dimensions depend on the configuration.

Advanced Programming

Thanks to our free PC application CONTROLLERS 2 you are able to discover the new possibilities of your model. Finding the best settings for your RC model has never been so exciting! Change over 50 parameters, upgrade firmware or check relevant data from the run.

CONTROLLER2

To connect ESC with PC you need USBCOM5 and CC_11 cable.

Not sure if this ESC is right for you? Take a look at all our speed controllers, read frequently asked questions or leave us a message, our support team will take care of you!

Max. peak current	500A
Number of cells	4 - 15
Max. continuous current	400A
Dimensions	see guide
Operating voltage	12 - 63 V
Possibility of setting an amount of residual energy for BEC
Model Type	For cars
Switching S-BEC voltage	V

Max. BEC current at 25 °C	A
Possibility of setting the voltage of BEC
Possibility of WR version (full protection against water)
Software updates available through internet
Reversible controller (both-way mode)
Programming using PC
Brake ON / OFF
ABS simulation
Possibility of setting brake ramps
Possibility of automatic braking in neutral throttle position
Possibility of connecting braking lights
Telemetry (real-time back data transfer)
Possibility of operation also with sensors motors
32-BIT SYSTEM
Possibility of very powerful switching BECs
"One-way" mode
Very high resistance against overloading
Compatible with all types of feeding cells
Possibility of cells temperature measuring (cells protection)
Real-time Monitoring (PC or other device)
Possibility of setting RPM limits (motor protection)
Number of regulation steps	2048
Possibility of automatic setting of cut off voltage
On-state switch (FETs) resistance at 25 °C	2 mW
Manually set type of cells
BEC short circuit protection
Possibility of manually set timing
Weight without power conductors	460 gram
Active free-wheeling circuit ON / OFF
Power conductors cross-section to batt. / to mot.	see guide
Adjustable acceleration speed
Servocable cross-section	0.25 mm²
Software reversal of rotation
Possibility of design with external heatsinks
False-start protection
Possibility of design with external heatsinks + FAN
Temperature fuse of the controller
Possibility of design with ON/OFF switch (connected safely)
Bidirectional "both-way" mode
Reading-out of data from the controller using PC
Possibility of switching reversible controller into "one-way" mode
ICS-2 connector - super-fast PC connection link
Proportional brake
Possibility of setting brake intensity
Possibility of setting neutral brake ramps
Setting of the range of neutral zone
Internal Data Logger (data recorder)
Automatic Sensor Setting
Number of NiCd, NiMh feeding cells	15
4 Memory Banks
Plug and Play (functional immediately without the need for additional programming)
Number of A123 feeding cells	5
Outstanding cells management
Switching HV-BEC voltage	V
Possibility of motor temperature measuring (motor protection)
Available BEC / OPTO versions
Possibility of setting current limits
Possibility of setting switching off voltage
Motor PWM frequency	8 kHz
Possibility of manually set number of cells
Max. RPM	200000
Automatically set timing
Dimensions with external capacitor	see guide
Possibility of automatic setting of throttle limits
Weight incl. all conductors	see guide
External signalization of important states
Length of the power conductors	see guide
Empty batt. behaviour - motor power reduction
Length of the servocable	190 mm
Masking of interference
Possibility of design with water-cooled heatsinks
Current fuse of the controller
Possibility of WP version (increased protection against water)
ACR - Automatic Current Reduce

Get the full advantage of our 30 years of experience with producing ESCs for both, industrial and modellers customers. X2-SERIES controllers are fully programmable and adjustable for any RC model. You can use our own PC software to adjust the parameters and reading out the history logs of your runs as well. With X2-SERIES controllers you will be able to find the most efficient setup. Developed with RC modellers in mind, we used our experience from various industrial projects to create reliable ESCs with sophisticated system of fuses for the safety of your model. This comes backed by 3 years warranty.

More info