TMM 40063-3 for Drones X2-SERIES PRO
| TMM 40063-3 for Drones X2-SERIES PRO | 815,35 € |
| 815,35 € |
Make your own custom configuration that fits your model. Choose from multiple add-ons and stand out from the crowd.
CONFIGURE YOUR OWN
Come in. Geek out.
If you can dream it, you can do it. TMM 40063-3 has everything. Seriously, everything! From internal data logging, and real-time monitoring to telemetry and a special MGM software for programming – your friends will envy you. With the greatest power and configurability yet, it is a speed controller created to let a wide range of RC models push the limits of what is possible. With 25kW in 500 [A] of peak currents, 400 [A] continuous and possibility of running up to 15S we made sure you will never be behind
Big just enough.
No wonder this ESC is the most popular option. Not just for the 5th scale but for every RC guy who needs extreme power. No one will stop you from putting it into anything – on the contrary, we will be happy to help you with that. Total dimensions depend on the configuration.
Advanced Programming
Thanks to our free PC application CONTROLLERS 2 you are able to discover the new possibilities of your model. Finding the best settings for your RC model has never been so exciting! Change over 50 parameters, upgrade firmware or check relevant data from the run.
To connect ESC with PC you need USBCOM5 and CC_11 cable.
Not sure if this ESC is right for you? Take a look at all our speed controllers, read frequently asked questions, or leave us a message and our support team will take care of you!
| Max. peak current | 500A |
| Number of cells | 4 - 15 |
| Max. continuous current | 400A |
| Operating voltage | 12 - 63 V |
| Max. BEC current at 25 °C | A |
| Possibility of very powerful switching BECs | |
| Model Type | For drones |
| Switching HV-BEC voltage | V |
| BEC short circuit protection | |
| Possibility of setting the voltage of BEC | |
| Possibility of cells temperature measuring (cells protection) | |
| Max. RPM | 200000 |
| Dimensions with external capacitor | see guide |
| Possibility of setting RPM limits (motor protection) | |
| Weight incl. all conductors | see guide |
| Length of the power conductors | see guide |
| Possibility of automatic setting of cut off voltage | |
| Length of the servocable | 190 mm |
| Manually set type of cells | |
| Possibility of design with water-cooled heatsinks | |
| Possibility of manually set timing | |
| Possibility of WP version (increased protection against water) | |
| Active free-wheeling circuit ON / OFF | |
| Possibility of design with ON/OFF switch (connected safely) | |
| Constant speed (Governor mode) | |
| Reading-out of data from the controller using PC | |
| Adjustable acceleration speed | |
| ICS-2 connector - super-fast PC connection link | |
| Empty batt. behaviour - motor power reduction | |
| Masking of interference | |
| Current fuse of the controller | |
| ACR - Automatic Current Reduce | |
| Telemetry (real-time back data transfer) | |
| Possibility of operation also with sensors motors | |
| 32-BIT SYSTEM | |
| "One-way" mode | |
| Compatible with all types of feeding cells | |
| Possibility of setting an amount of residual energy for BEC | |
| Number of regulation steps | 2048 |
| Very high resistance against overloading | |
| Motor PWM frequency | 8 kHz |
| On-state switch (FETs) resistance at 25 °C | 2 mW |
| Possibility of motor temperature measuring (motor protection) | |
| Dimensions | see guide |
| Possibility of setting current limits | |
| Weight without power conductors | 460 gram |
| Power conductors cross-section to batt. / to mot. | see guide |
| Possibility of setting switching off voltage | |
| Servocable cross-section | 0.25 mm2 |
| Possibility of manually set number of cells | |
| Possibility of design with external heatsinks | |
| Automatically set timing | |
| Possibility of design with external heatsinks + FAN | |
| Possibility of automatic setting of throttle limits | |
| Possibility of WR version (full protection against water) | |
| Possibility of connecting plane position lights and flashing lights | |
| Software updates available through internet | |
| External signalization of important states | |
| Programming using PC | |
| Adjustable deceleration speed | |
| Software reversal of rotation | |
| False-start protection | |
| Temperature fuse of the controller | |
| Internal Data Logger (data recorder) | |
| Real-time Monitoring (PC or other device) | |
| Automatic Sensor Setting | |
| 4 Memory Banks | |
| Number of A123 feeding cells | 5 |
| Switching S-BEC voltage | V |
| Available BEC / OPTO versions | |
| Number of NiCd, NiMh feeding cells | 15 |
| Plug and Play (functional immediately without the need for additional programming) | |
| Input control signal | 400 |
| Outstanding cells management |
Get the full advantage of our 30 years of experience with producing ESCs for both, industrial and modellers customers. X2-SERIES controllers are fully programmable and adjustable for any RC model. You can use our own PC software to adjust the parameters and reading out the history logs of your runs as well. With X2-SERIES controllers you will be able to find the most efficient setup. Developed with RC modellers in mind, we used our experience from various industrial projects to create reliable ESCs with sophisticated system of fuses for the safety of your model. This comes backed by 3 years warranty.
More info
Product categories:
Other products
LMT 3080 for Airplanes
The most favorite brushless motor of all RC fans. Incredible power up to 30kW. Higher efficiency and final torque for your model.
Brushless ESC + Motor Combo for 1/5 Cars
| Number of cells | 4 - 15 |
| Max. peak current | 500A |
| Max. RPM | 50000 |
| Max. power | 30kW |
