TMM 6026-3 for Cars X2-SERIES PRO ▪️ MGM CONTROLLERS
Share this on
  • facebook
  • twitter

TMM 6026-3 for Cars X2-SERIES PRO

Price includes following configuration
TMM 6026-3 for Cars X2-SERIES PRO 139,00 €
design with active FAN cooling (1 × heatsink + 1 × FAN) 19,95 €
Standard power cables 0,00 €
Increased humidity protection 8,95 €
ON/OFF switch 1,95 €
Price total excl. VAT 169,85 €
nazev produktu
Need a different configuration?

Make your own custom configuration that fits your model. Choose from multiple add-ons and stand out from the crowd.

CONFIGURE YOUR OWN
Operating voltage
Operating voltage
6 - 26 V
Max. continuous current
Max. continuous current
60A
Max. peak current
Max. peak current
75A
Dimensions
Dimensions
50 mm

Pushing the limits!

MGM speed controllers were designed to help you to push the limits of your model while staying on the safe side. Sophisticated data-logging and system of fuses enables you to get to the next level without risking your precious model.

Our technology was quickly adopted not just by RC modellers but various battlebots, solar boat or Space X Hyperloop teams and industrial projects.

Compatible with any motor

Whether you run inrunner, outrunner, sensored or sensorless motor. You can adjust settings of your ESC to work flawlessly with every motor on the market. We personally pair our ESCs with LMT motors made with German precision. You can choose from numerous types of motors and infinite variants of Kv. 


Advanced Programming

Thanks to our free PC application CONTROLLERS 2 you are able to discover the new possibilities of your model. Finding the best settings for your RC model has never been so exciting! Change over 50 parameters, upgrade firmware or check relevant data from the run.

CONTROLLER2

To connect ESC with PC you need USBCOM5 and CC_11 cable.

4 Memory Banks
Number of cells 2 - 6
Operating voltage 6 - 26 V
Number of A123 feeding cells 3
Very high resistance against overloading
Max. continuous current 60A
Possibility of cells temperature measuring (cells protection)
Available BEC / OPTO versions 0
Possibility of setting RPM limits (motor protection)
Switching HV-BEC voltage 5 V
Possibility of very powerful switching BECs
BEC short circuit protection
Possibility of setting an amount of residual energy for BEC
Motor PWM frequency 8 kHz
Possibility of automatic setting of cut off voltage
Max. RPM 200000
Manually set type of cells
Dimensions with external capacitor 65 mm
Possibility of manually set timing
Weight incl. all conductors 51 gram
Active free-wheeling circuit ON / OFF
Length of the power conductors 90 mm
Adjustable acceleration speed
Length of the servocable 190 mm
Software reversal of rotation
Possibility of design with water-cooled heatsinks
False-start protection
Possibility of WP version (increased protection against water)
Temperature fuse of the controller
Possibility of design with ON/OFF switch (connected safely)
Bidirectional "both-way" mode
Reading-out of data from the controller using PC
Possibility of switching reversible controller into "one-way" mode
ICS-2 connector - super-fast PC connection link
Proportional brake
Possibility of setting brake intensity
Possibility of setting neutral brake ramps
Setting of the range of neutral zone
Internal Data Logger (data recorder)
Real-time Monitoring (PC or other device)
Automatic Sensor Setting
32-BIT SYSTEM
Number of NiCd, NiMh feeding cells 6
"One-way" mode
Plug and Play (functional immediately without the need for additional programming)
Compatible with all types of feeding cells
Outstanding cells management
Max. peak current 75A
Possibility of motor temperature measuring (motor protection)
Switching S-BEC voltage 5 V
Possibility of setting current limits
Max. BEC current at 25 °C 6A
Possibility of setting the voltage of BEC
Number of regulation steps 2048
Possibility of setting switching off voltage
On-state switch (FETs) resistance at 25 °C 2 mW
Possibility of manually set number of cells
Dimensions 50 mm
Automatically set timing
Weight without power conductors 36 gram
Possibility of automatic setting of throttle limits
Power conductors cross-section to batt. / to mot. 2.5 mm2
External signalization of important states
Servocable cross-section 0.25 mm2
Empty batt. behaviour - motor power reduction
Possibility of design with external heatsinks
Masking of interference
Possibility of design with external heatsinks + FAN
Current fuse of the controller
Possibility of WR version (full protection against water)
ACR - Automatic Current Reduce
Software updates available through internet
Reversible controller (both-way mode)
Programming using PC
Brake ON / OFF
Model Type For cars
ABS simulation
Possibility of setting brake ramps
Possibility of automatic braking in neutral throttle position
Possibility of connecting braking lights
Telemetry (real-time back data transfer)
Possibility of operation also with sensors motors

Get the full advantage of our 30 years of experience with producing ESCs for both, industrial and modellers customers. X2-SERIES controllers are fully programmable and adjustable for any RC model. You can use our own PC software to adjust the parameters and reading out the history logs of your runs as well. With X2-SERIES controllers you will be able to find the most efficient setup. Developed with RC modellers in mind, we used our experience from various industrial projects to create reliable ESCs with sophisticated system of fuses for the safety of your model. This comes backed by 3 years warranty.

More info
Nazev
Warranty
Nazev
Premium customer service
Nazev
High controller efficiency
Nazev
Precise data logging + data analysis
Nazev
Unique systemof battery care
Nazev
32 bit system
Nazev
Unique parameters and options
Nazev
Each piece tested
Nazev
Real-time monitoring
Nazev
Golden multilayerPCB - 105µ

Product categories: