TMM 7063-3 for Race Boats X2-SERIES PRO ▪️ MGM CONTROLLERS
Share this on
  • facebook
  • twitter

TMM 7063-3 for Race Boats X2-SERIES PRO

Price includes following configuration
TMM 7063-3 for Race Boats X2-SERIES PRO 279,00 €
design with active FAN cooling (1 × heatsink + 1 × FAN) 19,95 €
Standard power cables 0,00 €
Increased humidity protection 8,95 €
ON/OFF switch 1,95 €
Price total excl. VAT 309,85 €
nazev produktu
Need a different configuration?

Make your own custom configuration that fits your model. Choose from multiple add-ons and stand out from the crowd.

Max. peak current
Max. peak current
Operating voltage
Operating voltage
9 - 63 V
Max. continuous current
Max. continuous current
50 mm


MGM speed controllers were designed to help you to push the limits of your model while staying on the safe side. Sophisticated data-logging and system of fuses enables you to get to the next level without risking your precious model.

Our technology was quickly adopted not just by RC modellers but various battlebots, solar boat or Space X Hyperloop teams and industrial projects.

Compatible with any motor

Whether you run inrunner, outrunner, sensored or sensorless motor. You can adjust settings of your ESC to work flawlessly with every motor on the market. We personally pair our ESCs with LMT motors made with German precision. You can choose from numerous types of motors and infinite variants of Kv. 

Advanced Programming

Thanks to our free PC application CONTROLLERS 2 you are able to discover the new possibilities of your model. Finding the best settings for your RC model has never been so exciting! Change over 50 parameters, upgrade firmware or check relevant data from the run.

To connect ESC with PC you need USBCOM5 and CC_11 cable.

Switching HV-BEC voltage V
BEC short circuit protection
Number of cells 3 - 15
Possibility of very powerful switching BECs
Possibility of setting an amount of residual energy for BEC
Reversible controller (both-way mode)
Switching S-BEC voltage V
Max. BEC current at 25 °C A
Possibility of setting the voltage of BEC
Model Type For boats
Available BEC / OPTO versions 0
Servocable cross-section 0.25 mm2
Possibility of manually set number of cells
Temperature fuse of the controller
Number of A123 feeding cells 4
Weight without power conductors 45 gram
ICS-2 connector - super-fast PC connection link
Software reversal of rotation
Automatic Sensor Setting
On-state switch (FETs) resistance at 25 °C 2 mW
Possibility of design with ON/OFF switch (connected safely)
Possibility of motor temperature measuring (motor protection)
External signalization of important states
Internal Data Logger (data recorder)
Possibility of design with water-cooled heatsinks
Plug and Play (functional immediately without the need for additional programming)
Possibility of manually set timing
Bidirectional "both-way" mode
Max. peak current 90A
Length of the power conductors 90 mm
Possibility of automatic setting of cut off voltage
Current fuse of the controller
"One-way" mode
Dimensions with external capacitor 80 mm
Programming using PC
Empty batt. behaviour - motor power reduction
Possibility of operation also with sensors motors
Motor PWM frequency 8 kHz
Possibility of WR version (full protection against water)
Possibility of cells temperature measuring (cells protection)
Possibility of connecting plane position lights and flashing lights
Setting of the range of neutral zone
Possibility of design with external heatsinks
Operating voltage 9 - 63 V
Automatically set timing
Max. continuous current 70A
Power conductors cross-section to batt. / to mot. 2.5 mm2
Possibility of setting switching off voltage
False-start protection
4 Memory Banks
Dimensions 50 mm
Reading-out of data from the controller using PC
Possibility of setting current limits
Adjustable deceleration speed
Real-time Monitoring (PC or other device)
Number of regulation steps 2048
Possibility of WP version (increased protection against water)
Outstanding cells management
Active free-wheeling circuit ON / OFF
Possibility of switching reversible controller into "one-way" mode
Length of the servocable 190 mm
Number of NiCd, NiMh feeding cells 9
Manually set type of cells
ACR - Automatic Current Reduce
Compatible with all types of feeding cells
Weight incl. all conductors 70 gram
Masking of interference
Max. RPM 200000
Software updates available through internet
Possibility of setting RPM limits (motor protection)
Adjustable acceleration speed
Telemetry (real-time back data transfer)
Possibility of design with external heatsinks + FAN
Very high resistance against overloading
Possibility of automatic setting of throttle limits

Get the full advantage of our 30 years of experience with producing ESCs for both, industrial and modellers customers. X2-SERIES controllers are fully programmable and adjustable for any RC model. You can use our own PC software to adjust the parameters and reading out the history logs of your runs as well. With X2-SERIES controllers you will be able to find the most efficient setup. Developed with RC modellers in mind, we used our experience from various industrial projects to create reliable ESCs with sophisticated system of fuses for the safety of your model. This comes backed by 3 years warranty.

More info
Premium customer service
High controller efficiency
Precise data logging + data analysis
Unique systemof battery care
32 bit system
Unique parameters and options
Each piece tested
Real-time monitoring
Golden multilayerPCB - 105µ

Product categories: