TMM 8026-3 for Cars X2-SERIES PRO
| TMM 8026-3 for Cars X2-SERIES PRO | 149,00 € |
| design with active FAN cooling (1 × heatsink + 1 × FAN) | 19,95 € |
| Standard power cables | 0,00 € |
| Increased humidity protection | 8,95 € |
| ON/OFF switch | 1,95 € |
| Price total excl. VAT | 179,85 € |
Make your own custom configuration that fits your model. Choose from multiple add-ons and stand out from the crowd.
CONFIGURE YOUR OWN
Pushing the limits!
MGM speed controllers were designed to help you to push the limits of your model while staying on the safe side. Sophisticated data-logging and system of fuses enables you to get to the next level without risking your precious model.Our technology was quickly adopted not just by RC modellers but various battlebots, solar boat or Space X Hyperloop teams and industrial projects.
Compatible with any motor
Whether you run inrunner, outrunner, sensored or sensorless motor. You can adjust settings of your ESC to work flawlessly with every motor on the market. We personally pair our ESCs with LMT motors made with German precision. You can choose from numerous types of motors and infinite variants of Kv.
Advanced Programming
Thanks to our free PC application CONTROLLERS 2 you are able to discover the new possibilities of your model. Finding the best settings for your RC model has never been so exciting! Change over 50 parameters, upgrade firmware or check relevant data from the run.
To connect ESC with PC you need USBCOM5 and CC_11 cable.
| 4 Memory Banks | |
| Number of cells | 2 - 6 |
| Operating voltage | 6 - 26 V |
| Number of A123 feeding cells | 3 |
| Very high resistance against overloading | |
| Max. continuous current | 80A |
| Possibility of cells temperature measuring (cells protection) | |
| Available BEC / OPTO versions | 0 |
| Possibility of setting RPM limits (motor protection) | |
| Switching HV-BEC voltage | 5 V |
| Possibility of very powerful switching BECs | |
| BEC short circuit protection | |
| Possibility of setting an amount of residual energy for BEC | |
| Motor PWM frequency | 8 kHz |
| Possibility of automatic setting of cut off voltage | |
| Max. RPM | 200000 |
| Manually set type of cells | |
| Dimensions with external capacitor | 65 mm |
| Possibility of manually set timing | |
| Weight incl. all conductors | 51 gram |
| Active free-wheeling circuit ON / OFF | |
| Length of the power conductors | 90 mm |
| Adjustable acceleration speed | |
| Length of the servocable | 190 mm |
| Software reversal of rotation | |
| Possibility of design with water-cooled heatsinks | |
| False-start protection | |
| Possibility of WP version (increased protection against water) | |
| Temperature fuse of the controller | |
| Possibility of design with ON/OFF switch (connected safely) | |
| Bidirectional "both-way" mode | |
| Reading-out of data from the controller using PC | |
| Possibility of switching reversible controller into "one-way" mode | |
| ICS-2 connector - super-fast PC connection link | |
| Proportional brake | |
| Possibility of setting brake intensity | |
| Possibility of setting neutral brake ramps | |
| Setting of the range of neutral zone | |
| Internal Data Logger (data recorder) | |
| Real-time Monitoring (PC or other device) | |
| Automatic Sensor Setting | |
| 32-BIT SYSTEM | |
| Number of NiCd, NiMh feeding cells | 6 |
| "One-way" mode | |
| Plug and Play (functional immediately without the need for additional programming) | |
| Compatible with all types of feeding cells | |
| Outstanding cells management | |
| Max. peak current | 100A |
| Possibility of motor temperature measuring (motor protection) | |
| Switching S-BEC voltage | 5 V |
| Possibility of setting current limits | |
| Max. BEC current at 25 °C | 6A |
| Possibility of setting the voltage of BEC | |
| Number of regulation steps | 2048 |
| Possibility of setting switching off voltage | |
| On-state switch (FETs) resistance at 25 °C | 2 mW |
| Possibility of manually set number of cells | |
| Dimensions | 50 mm |
| Automatically set timing | |
| Weight without power conductors | 36 gram |
| Possibility of automatic setting of throttle limits | |
| Power conductors cross-section to batt. / to mot. | 2.5 mm2 |
| External signalization of important states | |
| Servocable cross-section | 0.25 mm2 |
| Empty batt. behaviour - motor power reduction | |
| Possibility of design with external heatsinks | |
| Masking of interference | |
| Possibility of design with external heatsinks + FAN | |
| Current fuse of the controller | |
| Possibility of WR version (full protection against water) | |
| ACR - Automatic Current Reduce | |
| Software updates available through internet | |
| Reversible controller (both-way mode) | |
| Programming using PC | |
| Brake ON / OFF | |
| Model Type | For cars |
| ABS simulation | |
| Possibility of setting brake ramps | |
| Possibility of automatic braking in neutral throttle position | |
| Possibility of connecting braking lights | |
| Telemetry (real-time back data transfer) | |
| Possibility of operation also with sensors motors |
Get the full advantage of our 30 years of experience with producing ESCs for both, industrial and modellers customers. X2-SERIES controllers are fully programmable and adjustable for any RC model. You can use our own PC software to adjust the parameters and reading out the history logs of your runs as well. With X2-SERIES controllers you will be able to find the most efficient setup. Developed with RC modellers in mind, we used our experience from various industrial projects to create reliable ESCs with sophisticated system of fuses for the safety of your model. This comes backed by 3 years warranty.
More info
