TMM 8026-3 for Drones X2-SERIES
TMM 8026-3 for Drones X2-SERIES | 148,35 € |
design with active FAN cooling (1 × heatsink + 1 × FAN) | 19,95 € |
Standard power cables | 0,00 € |
Increased humidity protection | 8,95 € |
ON/OFF switch | 1,95 € |
Price total excl. VAT | 179,20 € |
Make your own custom configuration that fits your model. Choose from multiple add-ons and stand out from the crowd.
CONFIGURE YOUR OWNPushing the limits!
MGM speed controllers were designed to help you to push the limits of your model while staying on the safe side. Sophisticated data-logging and system of fuses enables you to get to the next level without risking your precious model.Our technology was quickly adopted not just by RC modellers but various battlebots, solar boat or Space X Hyperloop teams and industrial projects.
Compatible with any motor
Whether you run inrunner, outrunner, sensored or sensorless motor. You can adjust settings of your ESC to work flawlessly with every motor on the market. We personally pair our ESCs with LMT motors made with German precision. You can choose from numerous types of motors and infinite variants of Kv.
Advanced Programming
Thanks to our free PC application CONTROLLERS 2 you are able to discover the new possibilities of your model. Finding the best settings for your RC model has never been so exciting! Change over 50 parameters, upgrade firmware or check relevant data from the run.
To connect ESC with PC you need USBCOM5 and CC_11 cable.
Possibility of design with water-cooled heatsinks | |
Number of cells | 2 - 6 |
Possibility of manually set timing | |
Possibility of WP version (increased protection against water) | |
Active free-wheeling circuit ON / OFF | |
Possibility of design with ON/OFF switch (connected safely) | |
Constant speed (Governor mode) | |
Reading-out of data from the controller using PC |
Adjustable acceleration speed | |
ICS-2 connector - super-fast PC connection link | |
Empty batt. behaviour - motor power reduction | |
Masking of interference | |
Current fuse of the controller | |
ACR - Automatic Current Reduce | |
Telemetry (real-time back data transfer) | |
Possibility of operation also with sensors motors | |
32-BIT SYSTEM | |
"One-way" mode | |
Compatible with all types of feeding cells | |
Max. peak current | 100A |
Switching S-BEC voltage | 5 V |
Max. BEC current at 25 °C | 6A |
Operating voltage | 6 - 26 V |
Number of regulation steps | 2048 |
Very high resistance against overloading | |
Motor PWM frequency | 8 kHz |
Possibility of cells temperature measuring (cells protection) | |
Max. RPM | 200000 |
Possibility of setting RPM limits (motor protection) | |
Dimensions with external capacitor | 65 mm |
Possibility of very powerful switching BECs | |
Weight incl. all conductors | 51 gram |
Possibility of setting an amount of residual energy for BEC | |
Length of the power conductors | 90 mm |
Possibility of automatic setting of cut off voltage | |
Length of the servocable | 190 mm |
Manually set type of cells | |
Possibility of design with external heatsinks + FAN | |
Possibility of automatic setting of throttle limits | |
Possibility of WR version (full protection against water) | |
Possibility of connecting plane position lights and flashing lights | |
Software updates available through internet | |
External signalization of important states | |
Programming using PC | |
Adjustable deceleration speed | |
Model Type | For drones |
Software reversal of rotation | |
False-start protection | |
Temperature fuse of the controller | |
Internal Data Logger (data recorder) | |
Real-time Monitoring (PC or other device) | |
Automatic Sensor Setting | |
4 Memory Banks | |
Number of A123 feeding cells | 3 |
Max. continuous current | 80A |
Available BEC / OPTO versions | |
Switching HV-BEC voltage | 5 V |
Number of NiCd, NiMh feeding cells | 6 |
BEC short circuit protection | |
Plug and Play (functional immediately without the need for additional programming) | |
Input control signal | 400 |
Outstanding cells management | |
On-state switch (FETs) resistance at 25 °C | 2 mW |
Possibility of motor temperature measuring (motor protection) | |
Dimensions | 50 mm |
Possibility of setting current limits | |
Weight without power conductors | 36 gram |
Possibility of setting the voltage of BEC | |
Power conductors cross-section to batt. / to mot. | 2.5 mm2 |
Possibility of setting switching off voltage | |
Servocable cross-section | 0.25 mm2 |
Possibility of manually set number of cells | |
Possibility of design with external heatsinks | |
Automatically set timing |
Get the full advantage of our 30 years of experience with producing ESCs for both, industrial and modellers customers. X2-SERIES controllers are fully programmable and adjustable for any RC model. You can use our own PC software to adjust the parameters and reading out the history logs of your runs as well. With X2-SERIES controllers you will be able to find the most efficient setup. Developed with RC modellers in mind, we used our experience from various industrial projects to create reliable ESCs with sophisticated system of fuses for the safety of your model. This comes backed by 3 years warranty.
More info