TMM 25063-3 for Drones X2-SERIES PRO ▪️ MGM CONTROLLERS
Share this on
  • facebook
  • twitter

TMM 25063-3 for Drones X2-SERIES PRO

Price includes following configuration
TMM 25063-3 for Drones X2-SERIES PRO 549,00 €
Design with active FAN cooling (1 × FAN) 19,95 €
power cables 10.0 mm2 (8 AWG) 14,95 €
Increased humidity protection 8,95 €
ON/OFF switch 1,95 €
Price total excl. VAT 594,80 €
nazev produktu
Need a different configuration?

Make your own custom configuration that fits your model. Choose from multiple add-ons and stand out from the crowd.

CONFIGURE YOUR OWN
Max. peak current
Max. peak current
360A
Max. continuous current
Max. continuous current
250A
Dimensions
Dimensions
see guide
Operating voltage
Operating voltage
12 - 63 V

Small Size, Big Power.

Meet TMM 25063-3 - powerful ESC for all types of RC model. This speed controller excels in its size and functions like internal data logging, real-time monitoring or telemetry.

Break the Records

With the greatest power in such a small size it is a speed controller created to let a wide range of RC models push the limits of what is possible. With 25kW in 360 [A] of peak currents, 250 [A] continuous and possibility of running up to 15S we made sure you will never be behind.

Advanced Programming

Thanks to our free PC application CONTROLLERS 2 you are able to discover the new possibilities of your model. Finding the best settings for your RC model has never been so exciting! Change over 50 parameters, upgrade firmware or check relevant data from the run.

CONTROLLER2
To connect ESC with PC you need USBCOM5 and CC_11 cable.

Not sure if this ESC is right for you? Take a look at all our speed controllers, read frequently asked questions, or leave us a message and our support team will take care of you!

Max. peak current 360A
Number of cells 4 - 15
Max. continuous current 250A
Operating voltage 12 - 63 V
Dimensions see guide
32-BIT SYSTEM
Switching S-BEC voltage V
Max. BEC current at 25 °C A
"One-way" mode
Number of regulation steps 2048
Very high resistance against overloading
Motor PWM frequency 8 kHz
Possibility of cells temperature measuring (cells protection)
Max. RPM 200000
Dimensions with external capacitor see guide
Possibility of setting RPM limits (motor protection)
Weight incl. all conductors see guide
Possibility of very powerful switching BECs
Length of the power conductors see guide
Possibility of setting an amount of residual energy for BEC
Possibility of automatic setting of cut off voltage
Length of the servocable 190 mm
Manually set type of cells
Possibility of design with water-cooled heatsinks
Possibility of manually set timing
Possibility of WP version (increased protection against water)
Active free-wheeling circuit ON / OFF
Possibility of design with ON/OFF switch (connected safely)
Constant speed (Governor mode)
Reading-out of data from the controller using PC
Adjustable acceleration speed
ICS-2 connector - super-fast PC connection link
Empty batt. behaviour - motor power reduction
Masking of interference
Current fuse of the controller
ACR - Automatic Current Reduce
Telemetry (real-time back data transfer)
Possibility of operation also with sensors motors
4 Memory Banks
Number of A123 feeding cells 5
Available BEC / OPTO versions 0
Switching HV-BEC voltage V
Number of NiCd, NiMh feeding cells 15
BEC short circuit protection
Plug and Play (functional immediately without the need for additional programming)
Input control signal 400
Outstanding cells management
On-state switch (FETs) resistance at 25 °C 2 mW
Possibility of motor temperature measuring (motor protection)
Compatible with all types of feeding cells
Possibility of setting current limits
Weight without power conductors 300 gram
Possibility of setting the voltage of BEC
Power conductors cross-section to batt. / to mot. see guide
Possibility of setting switching off voltage
Servocable cross-section 0.25 mm2
Possibility of manually set number of cells
Possibility of design with external heatsinks
Automatically set timing
Possibility of design with external heatsinks + FAN
Possibility of automatic setting of throttle limits
Possibility of WR version (full protection against water)
Possibility of connecting plane position lights and flashing lights
Software updates available through internet
External signalization of important states
Programming using PC
Adjustable deceleration speed
Model Type For drones
Software reversal of rotation
False-start protection
Temperature fuse of the controller
Internal Data Logger (data recorder)
Real-time Monitoring (PC or other device)
Automatic Sensor Setting

Get the full advantage of our 30 years of experience with producing ESCs for both, industrial and modellers customers. X2-SERIES controllers are fully programmable and adjustable for any RC model. You can use our own PC software to adjust the parameters and reading out the history logs of your runs as well. With X2-SERIES controllers you will be able to find the most efficient setup. Developed with RC modellers in mind, we used our experience from various industrial projects to create reliable ESCs with sophisticated system of fuses for the safety of your model. This comes backed by 3 years warranty.

More info
Nazev
Warranty
Nazev
Premium customer service
Nazev
High controller efficiency
Nazev
Precise data logging + data analysis
Nazev
Unique systemof battery care
Nazev
32 bit system
Nazev
Unique parameters and options
Nazev
Each piece tested
Nazev
Real-time monitoring
Nazev
Golden multilayerPCB - 105µ

Product categories:

Other products

TMM 40063-3 for Drones X2-SERIES PRO

Number of cells 4 - 15
Max. continuous current 400A
Max. peak current 500A
Max. RPM 200000
from 709,00 €
Detail

ESC + Motor combo for 1/5 scale cars

Number of cells Array
Max. peak current 360A
Max. RPM 50000
Max. power 30kW
from 1 277,05 €
Detail