TMM 40063-3 for Cars X2-SERIES PRO ▪️ MGM CONTROLLERS
Share this on
  • facebook
  • twitter

TMM 40063-3 for Cars X2-SERIES PRO

The most popular electronic speed controller!

Price includes following configuration
TMM 40063-3 for Cars X2-SERIES PRO 815,35 €
2 cooling FANs XL 24,95 €
power cables 10.0 mm2 (8 AWG) 14,95 €
Increased humidity protection 8,95 €
864,20 €
nazev produktu
Need a different configuration?

Make your own custom configuration that fits your model. Choose from multiple add-ons and stand out from the crowd.

CONFIGURE YOUR OWN
Max. peak current
Max. peak current
500A
Max. continuous current
Max. continuous current
400A
Operating voltage
Operating voltage
12 - 63 V
Dimensions
Dimensions
see guide

Come in. Geek out.

If you can dream it, you can do it. TMM 40063-3 has everything. Seriously, everything! From internal data logging, and real-time monitoring to telemetry and a special MGM software for programming – your friends will envy you. With the greatest power and configurability yet, it is a speed controller created to let a wide range of RC models push the limits of what is possible. With 25kW in 500 [A] of peak currents, 400 [A] continuous and possibility of running up to 15S we made sure you will never be behind


Big just enough.

No wonder this ESC is the most popular option. Not just for the 5th scale but for every RC guy who needs extreme power. No one will stop you from putting it into anything – on the contrary, we will be happy to help you with that. Total dimensions depend on the configuration.

Advanced Programming

Thanks to our free PC application CONTROLLERS 2 you are able to discover the new possibilities of your model. Finding the best settings for your RC model has never been so exciting! Change over 50 parameters, upgrade firmware or check relevant data from the run.

CONTROLLER2
To connect ESC with PC you need USBCOM5 and CC_11 cable.

Not sure if this ESC is right for you? Take a look at all our speed controllers, read frequently asked questions or leave us a message, our support team will take care of you!

Model Type For cars
Number of cells 4 - 15
Max. peak current 500A
Brake ON / OFF
Max. continuous current 400A
4 Memory Banks
Operating voltage 12 - 63 V
Dimensions see guide
Reading-out of data from the controller using PC
Possibility of manually set number of cells
Real-time Monitoring (PC or other device)
Number of regulation steps 2048
Possibility of WP version (increased protection against water)
Possibility of setting the voltage of BEC
False-start protection
Setting of the range of neutral zone
Switching S-BEC voltage V
Length of the servocable 190 mm
Possibility of motor temperature measuring (motor protection)
Adjustable acceleration speed
Possibility of setting brake intensity
Compatible with all types of feeding cells
Weight incl. all conductors see guide
Plug and Play (functional immediately without the need for additional programming)
Possibility of manually set timing
Possibility of switching reversible controller into "one-way" mode
32-BIT SYSTEM
Max. RPM 200000
Software updates available through internet
Possibility of automatic setting of cut off voltage
ACR - Automatic Current Reduce
Telemetry (real-time back data transfer)
BEC short circuit protection
Possibility of design with external heatsinks + FAN
Possibility of very powerful switching BECs
Masking of interference
Possibility of automatic braking in neutral throttle position
Available BEC / OPTO versions
Servocable cross-section 0.25 mm2
Possibility of cells temperature measuring (cells protection)
External signalization of important states
ABS simulation
Number of A123 feeding cells 5
Weight without power conductors 460 gram
ICS-2 connector - super-fast PC connection link
Automatically set timing
Reversible controller (both-way mode)
Automatic Sensor Setting
On-state switch (FETs) resistance at 25 °C 2 mW
Possibility of design with ON/OFF switch (connected safely)
Possibility of setting switching off voltage
Temperature fuse of the controller
Internal Data Logger (data recorder)
Max. BEC current at 25 °C A
Possibility of design with water-cooled heatsinks
Possibility of setting current limits
Software reversal of rotation
Possibility of setting neutral brake ramps
Length of the power conductors see guide
Outstanding cells management
Active free-wheeling circuit ON / OFF
Proportional brake
"One-way" mode
Dimensions with external capacitor see guide
Number of NiCd, NiMh feeding cells 15
Programming using PC
Manually set type of cells
Bidirectional "both-way" mode
Possibility of operation also with sensors motors
Motor PWM frequency 8 kHz
Possibility of WR version (full protection against water)
Possibility of setting an amount of residual energy for BEC
Current fuse of the controller
Possibility of connecting braking lights
Switching HV-BEC voltage V
Possibility of design with external heatsinks
Possibility of setting RPM limits (motor protection)
Empty batt. behaviour - motor power reduction
Possibility of setting brake ramps
Power conductors cross-section to batt. / to mot. see guide
Very high resistance against overloading
Possibility of automatic setting of throttle limits
ESC SERIES

Get the full advantage of our 30 years of experience with producing ESCs for both, industrial and modellers customers. X2-SERIES controllers are fully programmable and adjustable for any RC model. You can use our own PC software to adjust the parameters and reading out the history logs of your runs as well. With X2-SERIES controllers you will be able to find the most efficient setup. Developed with RC modellers in mind, we used our experience from various industrial projects to create reliable ESCs with sophisticated system of fuses for the safety of your model. This comes backed by 3 years warranty.

More info
Nazev
Warranty
Nazev
Premium customer service
Nazev
High controller efficiency
Nazev
Precise data logging + data analysis
Nazev
Unique systemof battery care
Nazev
32 bit system
Nazev
Unique parameters and options
Nazev
Each piece tested
Nazev
Real-time monitoring
Nazev
Golden multilayerPCB - 105µ

Product categories:

Other products

LMT 3080 for Cars

The most favorite brushless motor of all RC fans. Incredible power up to 30kW. Higher efficiency and final torque for your wheels.

from 521,01 €
Detail

TMM 80063-3 for Cars X2-SERIES PRO

Number of cells 4 - 15
Max. continuous current 800A
Max. peak current 1000A
Max. RPM 200000
from 1 861,85 €
Detail

Brushless ESC + Motor Combo for 1/5 Cars

Number of cells 4 - 15
Max. peak current 500A
Max. RPM 50000
Max. power 30kW
from 1 650,25 €
Detail