Share this on
  • facebook
  • twitter

TMM 80063-3 for Cars X2-SERIES PRO

1000A burst ESC!

Price includes following configuration
TMM 80063-3 for Cars X2-SERIES PRO 1 861,85 €
2 cooling FANs XXL 34,95 €
power cables 10.0 mm2 (8 AWG) 14,95 €
Increased humidity protection 8,95 €
ON/OFF switch 1,95 €
1 922,65 €
nazev produktu
Need a different configuration?

Make your own custom configuration that fits your model. Choose from multiple add-ons and stand out from the crowd.

Max. peak current
Max. peak current
see guide
Operating voltage
Operating voltage
12 - 63 V
Max. continuous current
Max. continuous current

Insane power. For everything.

TMM 80063-3 was designed to push the limits and leave the competition behind. This speed controller is the most powerful thing you can get for your RC project. With 1000 [A] of peak currents, 800 [A] continuous and possibility of running up to 15S we made sure you will never be behind.


Advanced Programming

Thanks to our free PC application CONTROLLERS 2 you are able to discover the new possibilities of your model. Finding the best settings for your RC model has never been so exciting! Change over 50 parameters, upgrade firmware or check relevant data from the run.


To connect ESC with PC you need USBCOM5 and CC_11 cable.

Possibility of cells temperature measuring (cells protection)
Number of cells 4 - 15
Switching HV-BEC voltage V
Possibility of very powerful switching BECs
BEC short circuit protection
Possibility of setting an amount of residual energy for BEC
Model Type For cars
Switching S-BEC voltage V
Max. BEC current at 25 °C A
Possibility of setting the voltage of BEC
Max. peak current 1000A
Possibility of setting RPM limits (motor protection)
Number of regulation steps 2048
Possibility of automatic setting of cut off voltage
On-state switch (FETs) resistance at 25 °C 2 mW
Manually set type of cells
Dimensions see guide
Possibility of manually set timing
Weight without power conductors 1200 gram
Active free-wheeling circuit ON / OFF
Power conductors cross-section to batt. / to mot. see guide
Adjustable acceleration speed
Servocable cross-section 0.25 mm2
Software reversal of rotation
Possibility of design with external heatsinks
False-start protection
Possibility of design with external heatsinks + FAN
Temperature fuse of the controller
Possibility of WR version (full protection against water)
Software updates available through internet
Reversible controller (both-way mode)
Programming using PC
Brake ON / OFF
ABS simulation
Possibility of setting brake ramps
Possibility of automatic braking in neutral throttle position
Possibility of connecting braking lights
Telemetry (real-time back data transfer)
Possibility of operation also with sensors motors
Operating voltage 12 - 63 V
"One-way" mode
Very high resistance against overloading
Compatible with all types of feeding cells
Max. continuous current 800A
Possibility of motor temperature measuring (motor protection)
Available BEC / OPTO versions
Possibility of setting current limits
Possibility of setting switching off voltage
Motor PWM frequency 8 kHz
Possibility of manually set number of cells
Max. RPM 200000
Automatically set timing
Dimensions with external capacitor see guide
Possibility of automatic setting of throttle limits
Weight incl. all conductors see guide
External signalization of important states
Length of the power conductors see guide
Empty batt. behaviour - motor power reduction
Length of the servocable 190 mm
Masking of interference
Possibility of design with water-cooled heatsinks
Current fuse of the controller
Possibility of WP version (increased protection against water)
ACR - Automatic Current Reduce
Possibility of design with ON/OFF switch (connected safely)
Bidirectional "both-way" mode
Reading-out of data from the controller using PC
Possibility of switching reversible controller into "one-way" mode
ICS-2 connector - super-fast PC connection link
Proportional brake
Possibility of setting brake intensity
Possibility of setting neutral brake ramps
Setting of the range of neutral zone
Internal Data Logger (data recorder)
Real-time Monitoring (PC or other device)
Automatic Sensor Setting
Number of NiCd, NiMh feeding cells 15
4 Memory Banks
Plug and Play (functional immediately without the need for additional programming)
Number of A123 feeding cells 5
Outstanding cells management

Get the full advantage of our 30 years of experience with producing ESCs for both, industrial and modellers customers. X2-SERIES controllers are fully programmable and adjustable for any RC model. You can use our own PC software to adjust the parameters and reading out the history logs of your runs as well. With X2-SERIES controllers you will be able to find the most efficient setup. Developed with RC modellers in mind, we used our experience from various industrial projects to create reliable ESCs with sophisticated system of fuses for the safety of your model. This comes backed by 3 years warranty.

More info
Premium customer service
High controller efficiency
Precise data logging + data analysis
Unique systemof battery care
32 bit system
Unique parameters and options
Each piece tested
Real-time monitoring
Golden multilayerPCB - 105µ

Product categories:

Other products

TMM 16026-3 for Cars X2-SERIES

Number of cells 2 - 6
Max. continuous current 160A
Max. peak current 200A
Max. RPM 200000
from 217,35 €

TMM 25063-3 for Cars X2-SERIES

Number of cells 4 - 15
Max. continuous current 250A
Max. peak current 360A
Max. RPM 200000
from 550,85 €

TMM 40063-3 for Cars X2-SERIES

Number of cells 4 - 15
Max. continuous current 400A
Max. peak current 500A
Max. RPM 200000
from 723,35 €

TMM 25063-3 for Cars X2-SERIES PRO

Number of cells 4 - 15
Max. continuous current 250A
Max. peak current 360A
Max. RPM 200000
from 631,35 €